Sight Line Technology

"Sight Line Technology" is our patented window system at the front of all our worktop jigs.

All other worktop jigs work by using pegs at the rear, to set the depth of the female cut.

This means that if you want a specific overhang or you trim your worktop to size, you have to put spacers in front of those pins to get the correct depth of cut. All other jigs will give lengths of 600mm, 616mm, 635mm, 700mm etc.

With "Sight Line Technology" there are no peg holes needed and any length of female cut can be achieved from the front of the jig.